Crash sensors and airbag indicator

WARNING: Modifying or adding equipment to the front end of your vehicle (including frame, bumper, front end body structure and tow hooks) may affect the performance of the airbag system, increasin ...

Keys and Remote Control

...

Other materials:

Headlamp exit delay
You can set the delay time to keep the headlamps on for up to three minutes after the ignition is turned off. Follow the steps below to change the delay time (Steps 1 through 6 must be done within 10 seconds): 1. Turn the ignition off. 2. Turn the lighting control to the autolamp position. 3 ...

Installation
Removal CAUTION: Since the engine is not free-wheeling, timing procedures must be followed exactly or piston and valve damage can occur. 1. Remove the engine front cover. For additional information, refer to Engine Front Cover in this section. 2. Remove the crankshaft sensor ring from the cranksh ...

Evaporator Core Orifice
A/C Compressor and Clutch Assembly NOTE: Internal A/C compressor components are not serviced separately. The FS-10 A/C compressor is serviced only as an assembly. The A/C clutch pulley, A/C clutch field coil (19D798) and the shaft seal are serviceable. The FS-10 A/C compressor has the following ...