Ford Mustang Service Manual: Engine - Cobra 4.6L (4V)

General Specifications



a - With installation of a new filter.


a - With installation of a new filter.

b - P=Primary, S=Secondary, E=Exhaust c - Time necessary for plunger to leak down 1.6 mm of travel with 222 N force and leak down fluid in tappet.

Torque Specifications


a - Refer to the procedure.


a - Refer to the procedure.

Engine (Installation)
Engine       A modular engine is built around four modules: the intake module the cylinder head module (RH) the cylinder head module (LH) the lower engine module ...

Engine (Description and Operation)
Engine (Description and Operation) WARNING: Do not operate the engine with the hood open until the fan blade has been first examined for possible cracks and separation. The 4.6L (4V) (281 CID) Cobra ...

Other materials:

Air Conditioning (A/C) Compressor - 4.6L
Air Conditioning (Description and Operation) The A/C refrigerant system is a clutch cycling orifice tube type. The system components are: A/C compressor (19703) A/C clutch (2884) A/C condenser core (19712) A/C evaporator core (19860) suction accumulator ...

Pinpoint Test P: No Communication With The Restraints Control Module
Pinpoint Test A: The Air Bag Warning Indicator Is Illuminated Continuously - RCM Disconnected, Inoperative or Lost/Low Ignition Feed Normal Operation NOTE: During normal operation the air bag indicator will be lit continuously for 6 seconds after the ignitio ...

Rear Wheel Bearing and Axle Shaft Oil Seal
Rear Drive Axle and Differential   The axle housing assembly consists of a cast center section with two steel tube assemblies and a stamped differential housing cover (4033). The differential housing cover uses silicone sealant as a gasket. ...