Ford Mustang (1999-2004) Service Manual: Acceleration Control
- Acceleration Control (Description and Operation)
- Acceleration Control (Diagnosis and Testing)
- Accelerator Pedal and Shaft
- Accelerator Cable - 3.8L
- Accelerator Cable - 4.6L (2V)
- Accelerator Cable - Supercharged Engine
- Accelerator Cable Bracket - 3.8L
- Accelerator Cable Bracket - 4.6L (2V)
- Accelerator Cable Bracket - Supercharged Engine
Fuel Filter
Removal WARNING: Fuel supply lines on all vehicles equipped with fuel injected engines will remain pressurized for long periods of time after engine shutdown. Fuel system pressure must be relieved p ...Acceleration Control (Description and Operation)
Component Locations The throttle is controlled by the accelerator cable which is connected to the accelerator pedal and shaft. The accelerator pedal and shaft should travel smoothly from ...Other materials:
Noise, Vibration and Harshness (NVH) (Diagnosis and Testing)
Special Tool(s)
ChassisEAR
107-R2102 or equivalent
Electronic Vibration Analyzer
100-F027 (014-00344) or
equivalent
EngineEAR
107-R2100 or equivalent
Ultrasonic Leak Detector
134-R0135 or equivalent
T ...
Weld Nut Repair - "J" Nut, Restraints Control
Module
(RCM)
WARNING: To avoid accidental deployment and possible personal
injury, the backup
power supply must be depleted before repairing or replacing any front or
side air bag
supplemental restraint system (SRS) components and before servicing,
replacing, ...
Multifunction Switch
Removal
1. Disconnect the battery ground cable.
2. Remove the ignition switch lock cylinder.
1. Insert the ignition key into the ignition switch lock cylinder and
turn to RUN position.
2. Push the ignition switch lock cylinder release tab with a p ...