Ford Mustang (1999-2004) Service Manual: Accelerator Cable Bracket - Supercharged Engine
Removal and Installation
1. Disconnect the accelerator cable and speed control cable.
2. Depress the tabs and disconnect the accelerator cable and speed control cable from the accelerator cable bracket
3. Remove the bolts and the accelerator cable bracket.
4. To install, reverse the removal procedure.
Torque Specifications
Accelerator Cable Bracket - 4.6L (2V)
Removal and Installation
1. Disconnect the speed control cable from the throttle body and the bracket.
For additional
information, refer to Section.
2. Disconnect the accelerator cable from the thro ...
Speed Control
Torque Specifications
Speed Control
The speed control system consists of the following components:
speed control actuator cable (9A825)
deactivator switch
output shaft sensor (OSS)
speed control ...
Other materials:
Assembly
1. Lubricate the differential side gear thrust washers and the differential
side gear journals, and
assemble the washers to the gears.
Use SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL or equivalent
meeting
Ford specification WSP-M2C197-A.
2. Lub ...
Positive Crankcase Ventilation (PCV) Hose
Removal and Installation
1. Disconnect the hose on the PCV valve.
2. Twist and remove the PCV valve.
3. To install, reverse the removal procedure.
...
Floor Console
Removal and Installation
All vehicles
1. Disconnect the battery ground cable. For additional information,
refer to Section .
2. Apply the parking brake.
Vehicles with automatic transmission
3. Place the selector lever in the 1 position.
Vehicle ...
