Ford Mustang (1999-2004) Service Manual: Accelerator Cable - Supercharged Engine
Removal and Installation
1. Push the accelerator cable nylon bushing out of the accelerator pedal and shaft arm.
2. Disconnect the accelerator cable from the throttle cam.
3. Depress the tabs and disconnect the accelerator cable from the bracket.
4. Release the clip and position the accelerator cable aside.
5. Remove the bolts and the accelerator cable.
6. To install, reverse the removal procedure.
Accelerator Cable - 4.6L (2V)
Removal and Installation 1. Push the accelerator cable nylon bushing out of the accelerator pedal and shaft arm. 2. Remove the bolts retaining the accelerator cable to the dash panel. 3. Disconne ...Accelerator Cable Bracket - 3.8L
Removal and Installation 1. Disconnect the speed control cable from the throttle body and the bracket. For additional information, refer to Section. 2. Disconnect the accelerator cable from the thro ...Other materials:
Control Components (Description and Operation)
Manual A/C
The climate control system heats or cools the vehicle interior depending on
the function selector
position and the temperature selected. Function selector position determines
heating or cooling and air
distribution. The temperature blend control s ...
Wheel Hub and Bearing
Removal
CAUTION: Suspension fasteners are critical parts because they affect
performance of vital
components and systems and their failure can result in major service expense. A
new part with
the same part number or an equivalent part must be installed, if i ...
Symptom Chart
NOTE: New speed control diagnostic software is available in Version 12
or higher for the diagnostic
tool. When using this software, it is necessary to use Next Generation Speed
Control Adapter 007-
00586 with the diagnostic tool.
NOTE: Refer to the Wiring Di ...