Ford Mustang (1999-2004) Service Manual: Actuator - Door Lock
Removal
1. Remove the door trim panel (23942). For additional information, refer to Section.
2. Remove the door latch (21812). For additional information, refer to Latch-Door .
3. Remove the door ajar switch.
- Release the locking tab.
4. Remove the adjunct actuator.
Installation
1. To install, reverse the removal procedure.
Switch -Door Ajar Switch
Removal
1. Remove the door trim panel (23942). For additional information, refer to Section.
2. Remove the door latch (21812). For additional information, refer to Latch-Door .
3. Remove the door ajar switch.
- Release the locking tab.
Installation
1. To install, reverse the removal procedure.
Lock Cylinder - Luggage Compartment Lid
Removal 1. NOTE: Individual lock cylinders are repaired by discarding the inoperative cylinder and building a new lock cylinder using the appropriate lock repair package. The lock repair pac ...Switch - Door Lock
Removal 1. CAUTION: Place a rag between the window regulator switch plate and the door trim panel to avoid damaging the door trim panel. Position the window regulator switch plate (14524) asi ...Other materials:
Bearing Whine
Bearing whine is a high-pitched sound similar to a whistle. It is usually
caused by worn/damaged
pinion bearings, which are operating at driveshaft speed. Bearing noise occurs
at all driving speeds.
This distinguishes it from gear whine which usually comes ...
Noise, Vibration and Harshness (NVH) (Diagnosis and Testing)
Special Tool(s)
ChassisEAR
107-R2102 or equivalent
Electronic Vibration Analyzer
100-F027 (014-00344) or
equivalent
EngineEAR
107-R2100 or equivalent
Ultrasonic Leak Detector
134-R0135 or equivalent
T ...
Removal
1. Disconnect the battery ground cable. For additional information, refer
to Section.
2. Drain the engine cooling system. For additional information, refer to
Section .
3. Remove the crankshaft pulley. For additional information, refer to
Crankshaft ...