Ford Mustang (1999-2004) Service Manual: Air Bag Disposal - Undeployed Inoperative

WARNING: Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module. This will reduce the risk of injury in the event of an accidental deployment.

WARNING: Never probe the connectors on the air bag module. Doing so can result in air bag deployment, which can result in personal injury.

WARNING: Carry a live air bag module with the air bag and trim cover or deployment door pointed away from your body. This will reduce the risk of injury in the event of an accidental deployment.

NOTE: All inoperative air bag modules and safety belt pretensioners have been placed on the Mandatory Return List. All discolored or damaged air bag modules must be treated the same as any inoperative live air bag being returned.

1. Remove the inoperative component from the vehicle. For additional information, refer to the appropriate air bag procedure in this section.

Air Bag Disposal - Undeployed Inoperative

2. NOTE: When installing a new air bag module, a prepaid return postcard is provided with the replacement air bag module. The serial number for the new part and the vehicle identification number (VIN) must be recorded and sent to Ford Motor Company.

If installing a new air bag module, record the necessary information and return the inoperative air bag module to Ford Motor Company.

    Inspection and Repair After a Supplemental Restraint System (SRS) Deployment
    WARNING: If the supplemental restraint system (SRS) is being serviced, the system must be deactivated and restraint system diagnostic tools must be installed. Refer to Air Bag Supplemental Restraint ...

    Air Bag Disposal - Driver, Undeployed, Scrapped Vehicle
    Remote Deployment WARNING: Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module or safety belt retractor/preten ...

    Other materials:

    Rear Window Glass
    Special Tool(s) Rotunda Pneumatic Knife with Offset Blade 107-R1511 or equivalent The Pumper 164-R2459 or equivalent Rotunda Interior Auto Glass Cut-Out Knife Kit 164-R2450 or equivalent ...

    Rocker Arms - Inspection
    CAUTION: Do not attempt to true surfaces by grinding. Check the rocker arm pad, side rails and seat for excessive wear, cracks, nicks or burrs. Check the rocker arm seat bolt for stripped or broken threads. Install new components as ncessary or possible ...

    Driveline Angle
      Item Description 1 Bottom of the frame 2 Engine crankshaft centerline 3 Engine angle 4 Driveshaft and coupling shaft centerline 5 Driveshaft and coupling shaft angle 6 Rear axle pinion centerline ...