Ford Mustang (1999-2004) Service Manual: Air Cleaner - 3.8L
Removal and Installation
1. Remove the air cleaner outlet tube from the throttle body. For additional information, refer to Air Cleaner Outlet Pipe-3.8L in this section.
2. Disconnect the connector.
3. Remove the bolt.
4. Remove the air cleaner and duct assembly.
5. To install, reverse the removal procedure.
Air Cleaner Outlet Pipe - 4.6L (4V)
Removal and Installation Cobra 1. Disconnect the intake air temperature (IAT) sensor. All vehicles 2. Disconnect the vacuum hose. 3. Disconnect the breather hose. NOTE: Cobra shown, Mach I sim ...Air Cleaner - 4.6L (2V) and 4.6L (4V)
Removal and Installation Mach I 1. Disconnect the air intake scoop outlet tube. All vehicles 2. Remove the air cleaner outlet tube from the throttle body. For additional information, refer to Ai ...Other materials:
Removal
CAUTION: Suspension fasteners are critical parts because they affect
performance of vital
components and systems and their failure can result in major service expense. A
new part with
the same part number must be installed if installation becomes necessary. ...
General information
Note: Occasional brake noise is normal. If a metal-to-metal,
continuous
grinding or continuous squeal sound is present, the brake linings may be
worn out. Have them inspected by an authorized dealer. If your vehicle
has continuous vibration or shudder in the ...
Changing a fuse
Fuses
WARNING: Always replace a fuse with one that has the
specified amperage rating. Using a fuse with a higher amperage
rating can cause severe wire damage and could start a fire.
If electrical components in your
vehicle are not working, a fuse may
have blo ...