Ford Mustang (1999-2004) Service Manual: Air Cleaner Outlet Pipe - 3.8L
Removal and Installation
1. Remove the air cleaner outlet tube.
1. Loosen the clamps.
2. Disconnect the hose.
3. Remove the tube.
2. To install, reverse the removal procedure.
Air Cleaner Outlet Pipe -4.6L (2V)
Removal and Installation
1. Disconnect the hoses.
2. Remove the air cleaner outlet tube.
1. Loosen the clamps.
2. Remove the tube.
3. To install, reverse the removal procedure.
Intake Air Distribution and Filtering - Supercharger, Charge Air Cooler
The supercharger (SC) is a positive displacement pump. Its purpose is to supply an excess volume of intake air to the engine by increasing air pressure and density in the intake manifold. The sup ...Air Cleaner Outlet Pipe - 4.6L (4V)
Removal and Installation Cobra 1. Disconnect the intake air temperature (IAT) sensor. All vehicles 2. Disconnect the vacuum hose. 3. Disconnect the breather hose. NOTE: Cobra shown, Mach I sim ...Other materials:
Removal
1. Raise and support the vehicle.
2. Remove the rear wheel and tire assemblies.
3. CAUTION: Remove the rear brake calipers to prevent drag during the
drive pinion
bearing preload adjustment.
CAUTION: Do not allow the calipers to hang from the brake hoses ...
Manual Transaxle/Transmission - TR3650
General Specifications
Torque Specifications
...
Accelerator Cable - 3.8L
Removal and Installation
1. Push the accelerator cable nylon bushing out of the accelerator pedal and
shaft arm.
2. Remove the bolts retaining the accelerator cable to the dash panel.
3. Disconnect the accelerator cable from the throttle body by rotating ...