Ford Mustang (1999-2004) Service Manual: Air Cleaner Outlet Pipe - 4.6L (4V)
Removal and Installation
Cobra
1. Disconnect the intake air temperature (IAT) sensor.
All vehicles
2. Disconnect the vacuum hose.
3. Disconnect the breather hose.
NOTE: Cobra shown, Mach I similar.
4. Loosen the clamps and remove the air cleaner outlet pipe.
5. To install, reverse the removal procedure.
Air Cleaner Outlet Pipe - 3.8L
Removal and Installation 1. Remove the air cleaner outlet tube. 1. Loosen the clamps. 2. Disconnect the hose. 3. Remove the tube. 2. To install, reverse the removal procedure. Air Clea ...Air Cleaner - 3.8L
Removal and Installation 1. Remove the air cleaner outlet tube from the throttle body. For additional information, refer to Air Cleaner Outlet Pipe-3.8L in this section. 2. Disconnect the connec ...Other materials:
Exhaust Manifold to Exhaust Gas Recirculation (EGR)
Valve Tube - Mach I
Removal
1. Remove the air intake scoop. For additional information, refer to
Section.
2. Disconnect the exhaust gas recirculation (EGR) tube from the EGR valve.
3. With the vehicle in NEUTRAL, position it on a hoist.
4. Disconnect the EGR tube from th ...
Accessory Drive Belt Idler Pulley - 4.6L (2V) and (4V)
Removal and Installation
Mach I
1. Remove the air intake scoop. For additional information, refer to Section.
Cobra
2. Remove the supercharger drive belt cover.
3. Rotate the supercharger belt tensioner clockwise and remove the
supercharger belt.
4. Remov ...
Disassembly
1. Remove the differential assembly from the differential housing. For
additional information, refer
to Differential Case in this section.
2. Remove the bolts.
3. CAUTION: Do not damage the threads in the bolt holes.
Insert a punch in the bolt holes and d ...