Ford Mustang (1999-2004) Service Manual: Air Conditioning (A/C) Compressor Bracket - 3.8L
Removal and Installation
1. Remove the A/C compressor (19703). For additional information, refer to Air Conditioning (A/C) Compressor-3.8L in this section.
2. Remove the three bolts and one nut.
3. Remove the A/C compressor mounting bracket.
4. To install, reverse the removal procedure.
Air Conditioning (A/C) Compressor - 4.6L
Material Item Specification PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN- 12-C) WSH-M1C231- B Removal and Installation CAUTION: If installing ...Clutch And Clutch Field Coil
Special Tool(s) 2-Jaw Puller 205-D026 (D80L-1002-L) or equivalent Installer, A/C Compressor Coil 412-065 (T89P-19623-EH) Holding Fixture, Compressor Clutch ( ...Other materials:
Hill start assist
WARNING: The hill start assist feature does not replace the
parking brake. When you leave the vehicle, always apply the
parking brake and shift the transmission into position P for automatic
transmission or position 1 for manual transmissions.
WARNING: You mus ...
Removal
CAUTION: Since the engine is not free-wheeling, if the crankshaft or
the camshafts are
moved in any manner during removal and installation, the crankshaft and the
camshafts must
be re-synchronized.
1. Remove the engine front cover. For additional informatio ...
Symptom Charts
Symptom Chart - Air Leak and Wind Noise
Condition
Possible Sources
Action
Air leak around
door perimeter
Loose fit seal.
Seal installed
incorrectly.
Door misaligned.
Scuff plate installed
incor ...