Ford Mustang (1999-2004) Service Manual: Anti-Theft - PATS
Torque Specifications
- Anti-Theft - Passive Anti-Theft System (PATS) (Description and Operation)
- Anti-Theft - Passive Anti-Theft System (PATS) (Diagnosis and Testing)
- Key Programming - Erase All Key Codes and Program Two Keys
- Key Programming - Program a Key Using Two Programmed Keys
- Key Programming - Enable/Disable Spare Key Programming
- Key Programming - Additional Key With One Programmed Key
- Security Access - Procedure
- Module - Passive Anti-Theft Transceiver
Anti-Theft - Passive Anti-Theft System (PATS) (Description and Operation)
The passive anti-theft system (PATS) contains the following components:
theft indicator
encoded ignition key
transceiver module
instrument cluster
powertrain control module (PCM)
standard corpo ...
Other materials:
Rear Drive Axle and Differential
The differential housing (4010) consists of a cast aluminum housing and
a cast aluminum
differential housing cover (4033). The differential housing cover uses
silicone sealant as a
gasket.
The hypoid-design gearset consists of a 8.8-inch ...
Flexplate
Removal and Installation
1. Remove the transmission. For additional information, refer to Section.
2. Remove the six bolts retaining the flexplate to crankshaft, and remove the
flexplate.
3. To install, reverse the removal procedure.
Tighten the bolts in ...
Cable and Conduit
Removal
NOTE: The RH rear is shown, the LH is similar.
1. CAUTION: If any component in the parking brake system requires
repair or if the
rear axle housing (4010) is removed, the cable tension must be released.
Release the cable tension. For additional ...
