Ford Mustang (1999-2004) Service Manual: Brake Caliper Anchor Plate
Removal
1. Remove the pads. For additional information, refer to Pads in this section.
2. Remove the anchor plate (2B292).
1. Remove and discard the anchor plate bolts.
2. Remove the anchor plate.
Installation
1. CAUTION: Use correct type and length bolts.
Follow the removal procedure in reverse order.
- Install new anchor plate bolts.
Brake Caliper Anchor Plate - Cobra
Removal 1. Remove the pads. For additional information, refer to Brake Pads-Cobra in this section. 2. Remove the anchor plate bolts. Installation 1. Follow the removal procedure in reverse ...Disc
Removal 1. Remove the front disc brake caliper anchor plate (2B292). For additional information, refer to Brake Caliper Anchor Plate in this section. 2. Match mark the hub (1104) and the bra ...Other materials:
Piston
Material
Item
Specification
Super Premium SAE 5W-20
Motor Oil
XO-5W20-QSP or equivalent
WSS-M2C153-
H
Disassembly
1. Press the piston pin out of the connecting rod and piston assembly.
2. Remove the connecting rod from the piston.
3. ...
Speed Control (Diagnosis and Testing)
Refer to Wiring Diagrams Cell 31 , Speed Control for schematic and connector
information.
Special Tool(s)
Worldwide Diagnostic System
(WDS)
418-F224,
New Generation STAR (NGS)
Tester
418-F052, or equivalent
diagnostic tool
7 ...
Clutch Controls (Description and Operation)
The clutch control system engages and disengages the clutch. The clutch
control system disengages
the clutch when the clutch pedal is depressed and engages the clutch when the
clutch pedal is
released. Clutch pedal motion is transmitted by the c ...