Ford Mustang (1999-2004) Service Manual: Bushing - Stabilizer Bar
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major service expense. A new part with the same part number or an equivalent part must be installed, if installation is necessary. Do not use a part of lesser quality or substitute design. Torque values must be used as specified during reassembly to ensure correct retention of these parts.
1. Raise the vehicle on a hoist.
2. Remove the wheel and tire assemblies.
3. Disconnect the front stabilizer bar links (5K483) from the front stabilizer bar (5482).
1. Remove the nuts and bushings. Discard the nuts.
2. Rotate the stabilizer bar to disconnect the links.
4. Remove and discard the nuts.
5. Remove the stabilizer bar bracket (5486) and the stabilizer bar mounting bracket adapter (5B482).
6. Cut the stabilizer bar insulators (5493) from the stabilizer bar.
Installation
1. NOTE: To aid installation, coat the necessary parts of the front stabilizer bar and the inside diameter of the stabilizer bar bushing with Rubber Suspension Insulator Lube E25Y-19553-A or equivalent meeting Ford specification ESF-M99B112-A.
To install, reverse the removal procedure.
Link - Stabilizer Bar
Removal CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major service expense. A new part with the sa ...Spindle
Special Tool(s) Tie-Rod End Remover 211-001 (TOOL-3290-D) or Equivalent Removal CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and ...Other materials:
Gear (Disassembly and Assembly)
Special Tool(s)
Head Mounting Fixture
303-D041 (D83L-500-B1) or
Equivalent
Inner Tie Rod Socket Tool
211-D025 (D90P-3290-A) or
Equivalent
Steering Gear Holding Fixture
211-D011 (D87P-3504-B) or
Equivalent
Material
...
Manual Transmission
The T56 six-speed manual transmission features the following:
six forward speeds and one reverse speed.
forward gears are synchronized and helical cut.
a reverse gear operates through a constant-mesh, fully synchronized
system.
a shift interlock system ...
Checking MyKey system status
You can find information about your programmed MyKeys by using the
information display.
MYKEY DISTANCE
Tracks the distance when drivers use a MyKey. The only way to delete
the accumulated distance is by using an admin key to clear your MyKey.
If the distance ...