Ford Mustang Service Manual: Cable and Bracket

External Controls (Description and Operation)

The transmission shift cable transfers the transmission operating mode from the gearshift lever to the automatic transmission (7003). The indicated position of the transmission floor mounted selector lever is transferred to the transmission through the cable and down to the manual control lever on the transmission.

Shift Interlock System

The brake/shift interlock mechanism is used on vehicles equipped with an automatic transmission.

This system is used to prevent shifting from PARK unless the brake pedal is depressed. The brake/shift interlock system consists of an actuator attached to the key interlock assembly and necessary wiring. The shift lock actuator is energized when the ignition switch is turned to the run position, locking the floor mounted transmission range selector lever in the PARK position. When the brake pedal is depressed, the shift lock actuator is deactivated and the floor mounted transmission range selector lever can be moved out of the PARK position.

Transmission Control Switch (TCS)

The transmission control switch (TCS) is a momentary contact switch that is located on the floor mounted transmission range selector lever. Pushing the TCS will either disengage or engage the overdrive function of the automatic transmission. If the OVERDRIVE is disengaged, the word O/D OFF will illuminate on the instrument cluster.

    Brake Shift Interlock Actuator
    External Controls (Description and Operation) The transmission shift cable transfers the transmission operating mode from the gearshift lever to the automatic transmission (7003). The indicated posit ...

    Selector Lever
    External Controls (Description and Operation) The transmission shift cable transfers the transmission operating mode from the gearshift lever to the automatic transmission (7003). The indicated posit ...

    Other materials:

    Pinpoint Tests
    Principles of Operation The vehicle has two module communications networks. The standard corporate protocol (SCP) which is an unshielded twisted pair cable (data bus plus, Circuit 914 [TN/OG] and data bus minus, Circuit 915 [PK/LB]), and the internation ...

    Steering Column (Disassembly and Assembly)
    Steering Column (Description and Operation)   NOTE: All fasteners are important because they can affect the performance of vital parts and systems. Incorrect installation of the fasteners can result in major repair expenses. They must be installed ...

    Axle
    Rear Drive Axle and Differential   The differential housing (4010) consists of a cast aluminum housing and a cast aluminum differential housing cover (4033). The differential housing cover uses silicone sealant as a gasket. The hypoid-desig ...