Ford Mustang Service Manual: Caliper

Front Disc Brake (

Description and Operation)

Front Disc Brake Components

 


 

Disc Brake Caliper Components


Disc Brake Caliper Components

 


 

The front disc brake caliper (2B120):


The front disc brake caliper (2B120):

  • bolts to the front disc brake caliper anchor plate (2B292), which bolts to the front wheel spindle (3105).
  • is a pin slider, dual piston design.

The front brake discs (1125):

  • are of a ventilated full-cast design, with non-directional cooling fins.
  • are serviced with the disc brake caliper and front disc brake caliper anchor plate removed.

The front brake disc shield (2K005):

  • is riveted to the front wheel spindle.
  • protects the front wheel bearings and inboard surface of the front brake disc.

The pads:

  • are housed in the front disc brake caliper anchor plate.
  • are of a non-asbestos, non-metallic composition.
Brake Pads - Cobra
Front Disc Brake (Description and Operation) Front Disc Brake Components   Disc Brake Caliper Components   The front disc brake caliper (2B120): bolts to the front disc brake c ...

Removal
Removal 1. Raise and support the vehicle. 2. Remove the wheel and tire assembly. 3. WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands ...

Other materials:

Main Control Valve Body
Transmission Description (Description and Operation) The 4R70W has the following features: Wide ratio gears Four speeds Rear wheel drive Automatic Electronic shift Torque converter clutch control Line pressure controls The transm ...

Towing the vehicle on four whe
Emergency Towing If your vehicle becomes inoperable (without access to wheel dollies, car-hauling trailer, or flatbed transport vehicle), it can be flat-towed (all wheels on the ground, regardless of the powertrain and transmission configuration) under th ...

Exhaust Gas Recirculation (EGR) Valve
Engine Emission Control (Description and Operation) CAUTION: Do not remove any part of the engine emission control system. Operating the engine without the engine emission control system will reduce fuel economy and engine ventilation. This will weaken engin ...