Ford Mustang Owners Manual: Changing the wiper blades

1. Pull the wiper blade and arm away from the glass.


1. Pull the wiper blade and arm away from the glass.

2. Squeeze the locking tabs to release the blade from the arm and pull the blade away from the arm to remove it.

3. Attach the new blade to the arm and snap it into place.

Replace wiper blades at least once per year for optimum performance.

Poor wiper quality can be improved by cleaning the wiper blades and the windshield.

To prolong the life of the wiper blades, it is highly recommended to scrape off the ice on the windshield before turning on the wipers.

The layer of ice has many sharp edges and can damage the micro edge of the wiper rubber element.

    Checking the wiper blades
    Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blades with washer fluid or water applied with a soft sponge or cloth. ...

    Air filter check
    WARNING: To reduce the risk of vehicle damage and or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. Note: Failure ...

    Other materials:

    Coupling
    Steering Column (Description and Operation)   NOTE: All fasteners are important because they can affect the performance of vital parts and systems. Incorrect installation of the fasteners can result in major repair expenses. They must be installed ...

    Removal
    Removal 1. Disconnect the battery ground cable. 2. Remove the air cleaner outlet tube. For additional information, refer to Section. 3. Remove the radiator sight shield. 4. Install the special tool. 5. Using the special tools, support the engine. 6. Raise ...

    Gear Howl and Whine
    Driveline System Special Tool(s) Clamp Plate 205-320 (T92L-4851-C) Clutch Housing Alignment Adapter 308-021 (T75L-4201-A) Companion Flange Holding Tool 205-126 (T78P-4851-A) Companion Flange Runout Gau ...