Ford Mustang (1999-2004) Service Manual: Coupling
Removal and Installation
1. CAUTION: Do not allow the steering column shaft to rotate while intermediate shaft is disconnected or damage to the clockspring can result. If there is evidence that the steering column shaft has rotated the clockspring must be removed and recentered.
NOTE: Discard the steering column shaft pinch bolt and the lower intermediate shaft-to-steering gear pinch bolt upon removal. Do not reuse, install new bolts.
Remove the pinch bolts and disconnect the coupling from the column.
2. Remove the coupling.
3. To install, reverse the removal procedure.
Steering Column Shaft
Removal and Installation 1. CAUTION: Do not allow the steering column shaft to rotate while intermediate shaft is disconnected or damage to the clockspring can result. If there is evidence that the ...Steering Column (Disassembly and Assembly)
Special Tool(s) Steering Column Locking Lever Tool (Shop Fabricated) ...Other materials:
Principles of operation
MyKey allows you to program keys with restricted driving modes to
promote good driving habits. You can use all but one of the keys
programmed to your vehicle with these restricted modes.
Any keys that have not been programmed are referred to as
administrator ...
Pump and Intermediate Clutch Piston
Special Tool(s)
Installer, Front Pump Fluid
Seal
307-014 (T63L-77837-A)
Protector, Piston Seal
307-339 (T95L-77005-A)
Pump and Intermediate Clutch Piston - Disassembled View
...
Anti-Theft - Passive Anti-Theft System (PATS) (Diagnosis and Testing)
Refer to Wiring Diagrams Cell 112 , Anti-Theft for schematic and connector
information.
Refer to Wiring Diagrams Cell 60 , Instrument Cluster for schematic and
connector information.
Special Tool(s)
73III Automotive Meter
105-R0057 or equivalen ...