Ford Mustang (1999-2004) Service Manual: Crankshaft Position (CKP) Sensor - 4.6L

Ford Mustang (1999-2004) Service Manual / Engine / Electronic Engine Controls / Crankshaft Position (CKP) Sensor - 4.6L

Removal

1. Disconnect the battery ground cable. For additional information, refer to Section.

2. Remove the A/C compressor. For additional information, refer to Section.

3. Remove the crankshaft position (CKP) sensor.

  • Disconnect the connector.
  • Remove the bolt and remove the sensor.

Crankshaft Position (CKP) Sensor - 4.6L

Installation

1. To install, reverse the removal procedure.

    Crankshaft Position (CKP) Sensor - 3.8L
    Removal 1. Disconnect the battery ground cable. For additional information, refer to Section. 2. Remove the crankshaft position (CKP) sensor. Disconnect the connector. Remove the bolt ...

    Powertrain Control Module (PCM)
    Removal 1. Disconnect the battery ground cable. For additional information, refer to Section. 2. Remove the RH front door scuff plate. 3. Remove the RH cowl side trim panel. Remove the ...

    Other materials:

    Removal
    1. Disconnect the battery ground cable (14301). 2. Remove the air cleaner outlet tube (9B659). 3. Remove the radiator sight shield (8C291). 4. Remove the coolant recovery reservoir (8A080). 1. Disconnect the hose. 2. Remove the bolts. 3. Remo ...

    Oil Pump Screen and Pickup Tube
    Removal and Installation 1. Remove the oil pan (6675). For additional information, refer to Oil Pan in this section. 2. Remove the oil pump screen cover and tube (6622) and discard the gasket. 1. Remove the nut. 2. Remove the two bolts. 3. Remov ...

    Engine (Assembly)
    Special Tool(s) Guides, Connecting Rod 303-442 (T93P-6136-A) Installer, Crankshaft Vibration Damper 303-102 (T74P-6316-B) Installer, Front Cover Oil Seal 303-335 (T88T-6701-A) Installer, Crankshaft Rear ...