Ford Mustang (1999-2004) Service Manual: Crankshaft Rear Oil Seal
Special Tool(s)
|
|
Installer, Crankshaft Rear Oil Seal 303-518 (T95P-6701-DH) |
 |
Remover, Crankshaft Rear Oil Seal 303-519 (T95P-6701-EH) |
 |
Installer, Crankshaft Rear Oil Seal 303-516 (T95P-6701-BH) |
 |
Remover, Crankshaft Rear Oil Slinger 303-514 (T95P-6701-AH) |
 |
Installer, Crankshaft Rear Oil Slinger 303-517 (T95P-6701-CH) |
 |
Impact Slide Hammer 100-001 (T50T-100-A) |
Material
| Item | Specification |
| Super Premium SAE 5W-20 Engine Oil XO-5W20-QSP or equivalent | WSS-M2C153- H |
Installation
1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive
discs or other
abrasive means to clean the sealing surfaces. These tools cause scratches and
gouges
which make leak paths. Use a p ...
Removal
Automatic transmission vehicles
1. Remove the flexplate. For additional information, refer to Flexplate in
this section.
Manual transmission vehicles
2. Remove the flywheel. For additional informatio ...
Other materials:
Moulding - Roof Side
Removal and Installation
1. Remove the weatherstrip.
2. Remove the exterior roof side moulding screws.
3. Remove the interior roof side moulding screws.
4. Remove the roof side moulding screw.
5. Release the clips.
1. Lift up to release the two ...
Engine Cooling (Description and Operation)
CAUTION: Vehicle cooling systems are filled with Motorcraft Premium
Gold Engine
Coolant VC-7-A (in Oregon VC-7-B) or equivalent meeting Ford specification
WSS-M97B51-A1
(yellow color). Always fill the cooling system with the same coolant that is
present in ...
Symptom Chart
Condition
Possible Sources
Action
Dogtracking
Excessive rear
thrust angle.
Front or rear
suspension
components.
Drive axle
damaged.
CHECK the wheel alignment.
ADJUST as necessary
INSPE ...
