Ford Mustang (1999-2004) Service Manual: Differential Case
Special Tool(s)
2-Jaw Puller 205-D072 (D97L-4221-A) or equivalent | |
Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent | |
Gauge, Clutch Housing 308-021 (T75L-4201-A) or equivalent | |
Installer, Differential Shim 205-220 (T85L-4067-AH) | |
Installer, Differential Side Bearing 205-010 (T57L-4221-A2) | |
Step Plate 205-D061 (D83T-4205-C2) or equivalent |
Final assembly
23. Install the differential assembly in the differential housing. For additional information, refer to Differential Case in this section. 24. CAUTION: Align the index marks. CAUTION: Install the d ...Removal
1. Remove the differential housing cover (4033) and drain the rear axle (4001). For additional information, refer to Differential Housing Cover in this section. 2. CAUTION: Reinstall the differentia ...Other materials:
Valve Stem to Valve Guide Clearance
Special Tool(s)
Dial Indicator Gauge with
Holding Fixture
100-002 (TOOL-4201-C) or
equivalent
Clearance Gauge, Valve Guide
303-004 (TOOL-6505-E) or
equivalent
NOTE: Valve stem diameter must be within specifications before
checkin ...
Piston
Material
Item
Specification
Super Premium SAE 5W-20
Motor Oil
XO-5W20-QSP or equivalent
WSS-M2C153-
H
Disassembly
1. Press the piston pin out of the connecting rod and piston assembly.
2. Remove the connecting rod from the piston.
3. ...
Idle Air Control (IAC) Valve - 3.8L
Removal
1. Disconnect the battery ground cable. For additional information,
refer to Section.
2. NOTE: Discard the idle air control (IAC) valve gasket.
Remove the IAC valve.
Disconnect the connector.
Remove the two bolts, the IAC valve and ...