Ford Mustang (1999-2004) Service Manual: Differential Case and Ring Gear - Conventional
Special Tool(s)
2-Jaw Puller 205-D072 (D97L-4221-A) or equivalent | |
Installer, Differential Side Bearing 205-010 (T57L-4221-A2) | |
Step Plate 205-D061 (D83T-4205-C2) or equivalent |
Axle Housing
Removal and Installation 1. CAUTION: The vehicle must be on level ground and at curb height. Mark the rear shock absorbers relative to their protective sleeve. During installation, raise the ...Disassembly
1. Remove the differential assembly from the differential housing. For additional information, refer to Differential Case in this section. 2. Remove the bolts. 3. CAUTION: Do not damage the thread ...Other materials:
Fittings - R-Clip
Material
Item
Specification
SAE 5W-20 Super Premium
Synthetic Blend Motor Oil
XO-5W20-QSP or equivalent
WSS-M2C153-
H
Disconnect
WARNING: Do not smoke or carry lighted tobacco or open flame of any
type when
working on or near any fuel- ...
Under hood overview
3.7L V6 Engine
A. Battery
B. Engine oil dipstick
C. Engine oil filler cap
D. Brake fluid reservoir
E. Air filter assembly
F. Engine coolant reservoir
G. Windshield washer fluid reservoir
H. Power distribution box
5.0L V8 Engine
A. Battery
B. Engine oil fille ...
Moulding - Roof Side
Removal and Installation
1. Remove the weatherstrip.
2. Remove the exterior roof side moulding screws.
3. Remove the interior roof side moulding screws.
4. Remove the roof side moulding screw.
5. Release the clips.
1. Lift up to release the two ...