Ford Mustang Service Manual: Disassembly

Disassembly

1. NOTE: Mark the position of each gear shifter fork (7230).

Place the gear shift plates (7N232) and the gear selector interlock sleeve (7K201) in the neutral position to center the gear shift plates and the selector body (7302).

2. Rotate the main shift control shaft (7358) counterclockwise and pull it


2. Rotate the main shift control shaft (7358) counterclockwise and pull it rearward to access the pin. Remove the pin.

3. Using a twisting motion, remove the main shift control shaft.


3. Using a twisting motion, remove the main shift control shaft.

4. Remove the gear shifter forks, the gear shift plates, the pin, the gear


4. Remove the gear shifter forks, the gear shift plates, the pin, the gear selector interlock sleeve, and the selector body.

5. Remove the O-ring (N800037-S2).


5. Remove the O-ring (N800037-S2).

6. CAUTION: Note the orientation of the gear shift plate for assembly


6. CAUTION: Note the orientation of the gear shift plate for assembly reference.

Remove the gear shift plate and the gear shift fork inserts (7L082) from the shifter forks.

Assembly


    Selector Plate
    Manual Transmission The T5OD 5-speed transmission: fifth speed gear functions as an overdrive gear. forward gears are synchronized and helical cut. shift interlock system prevents the engagem ...

    Assembly
    Disassembly 1. NOTE: Mark the position of each gear shifter fork (7230). Place the gear shift plates (7N232) and the gear selector interlock sleeve (7K201) in the neutral position to center the ...

    Other materials:

    Using voice recognition
    This system helps you control many features using voice commands. This allows you to keep your hands on the wheel and focus on what is in front of you. Initiating a Voice Session Push the voice icon; a tone sounds and Listening appears in the display. S ...

    Engine (Removal)
    Engine Component View Cylinder Heads and Valve Train Components   Engine Front Cover Components   Engine Components   Cylinder Block and Lower End Components   Engine (DIAGNOSIS AND TESTING) Refer to Section for basic mecha ...

    Spark Plug Wire
    Engine Ignition (Description and Operation) The ignition coil (12029), which is mounted on the upper intake manifold, can be described as a coil pack containing three separate coil units. Each coil unit is individually controlled by the powertrain control mo ...