Ford Mustang Service Manual: Disassembly
Disassembly
1. Remove the No. 1 selective pump support thrust washer.
2. Remove the front pump support.
1. Remove the bolts.
2. Remove the front pump support.
3. Remove the seal rings.
4. Remove the inner and outer pump gerotor gears.
5. Carefully pry spring retainer tabs and remove the spring retainer assembly.
6. Remove the intermediate clutch piston.
7. Remove the clutch piston seals.
1. Remove the intermediate clutch piston outer seal.
2. Remove the intermediate clutch piston inner seal.
8. Remove and discard the front pump seal.
Pump and Intermediate Clutch Piston
Transmission Description (Description and Operation) The 4R70W has the following features: Wide ratio gears Four speeds Rear wheel drive Automatic Electronic shift Torque conver ...Assembly
Disassembly 1. Remove the No. 1 selective pump support thrust washer. 2. Remove the front pump support. 1. Remove the bolts. 2. Remove the front pump support. 3. Remove the seal rings. 4. R ...Other materials:
Normal Schedule
General Maintenance Information
NOTE: This is a generic maintenance schedule for all Ford, Lincoln and
Mercury vehicles. There may
be items listed that do not apply to all vehicles.
The Normal Schedule applies to operation of the vehicle under typical, every ...
Fuel Injectors
Fuel Charging and Controls
The fuel injection supply manifold (9F792):
delivers fuel to the fuel injector.
receives fuel from the fuel supply line.
The throttle body:
controls air supply to the upper intake manifold by positioning the
throttle plate.
...
Mirror - Motor
Rear View Mirrors (Diagnosis and Testing)
Refer to Wiring Diagrams Cell 124 , Power Mirrors for schematic and
connector information.
Special Tool(s)
73III Automotive Meter
105-R0057 or equivalent
Flex Probe Kit
105-R025B or eq ...