Ford Mustang Service Manual: Disc

Front Disc Brake (

Description and Operation)

Front Disc Brake Components

 


 

Disc Brake Caliper Components


Disc Brake Caliper Components

 


 

The front disc brake caliper (2B120):


The front disc brake caliper (2B120):

  • bolts to the front disc brake caliper anchor plate (2B292), which bolts to the front wheel spindle (3105).
  • is a pin slider, dual piston design.

The front brake discs (1125):

  • are of a ventilated full-cast design, with non-directional cooling fins.
  • are serviced with the disc brake caliper and front disc brake caliper anchor plate removed.

The front brake disc shield (2K005):

  • is riveted to the front wheel spindle.
  • protects the front wheel bearings and inboard surface of the front brake disc.

The pads:

  • are housed in the front disc brake caliper anchor plate.
  • are of a non-asbestos, non-metallic composition.
    Brake Caliper Anchor Plate
    Front Disc Brake (Description and Operation) Front Disc Brake Components   Disc Brake Caliper Components   The front disc brake caliper (2B120): bolts to the front disc brake c ...

    Shield
    Front Disc Brake (Description and Operation) Front Disc Brake Components   Disc Brake Caliper Components   The front disc brake caliper (2B120): bolts to the front disc brake c ...

    Other materials:

    Engine - 3.8L
    General Specifications a - 20-200 seconds to leakdown 3.18 mm (0.125 in) with 225 Newtons (50 pounds) load and tappet filled with leak-down fluid. Torque Specifications a - Refer to the procedure in this section b - Advance one-half turn aft ...

    NVH Condition and Symptom Categories
    Road Test NOTE: It may be necessary to have the customer ride along or drive the vehicle to point out the concern. During the road test, take into consideration the customer's driving habits and the driving conditions. The customer's concern just may be an a ...

    Engine (Removal)
    Engine WARNING: Do not operate the engine with the hood open until the fan blade has been first examined for possible cracks and separation. The 4.6L (4V) (281 CID) is a V-8 engine with the following features: dual overhead camshafts four valves per cyl ...