Ford Mustang (1999-2004) Service Manual: Door - Air Inlet Duct
Removal
1. Remove the evaporator core housing. For additional information, refer to Section.
2. Disconnect the vacuum line.
3. Remove the screws and remove the duct.
Installation
1. To install, reverse the removal procedure.
Plenum Chamber
Removal
1. Remove the instrument panel. For additional information, refer to Section.
2. Remove the audio unit. For additional information, refer to Section.
3. If equipped, remove the CD player. Fo ...
Heating and Ventilation
General Specifications
Torque Specifications
...
Other materials:
Charge Air Cooler
Material
Item
Specification
Silicone Gasket and Sealant
F7AZ-19554-EA or equivalent
WSE-M4G323-EA
Removal and Installation
1. Drain the supercharger coolant. For additional information, refer to
Section.
2. Release the fuel pressure. F ...
Cooling System Draining, Filling and Bleeding
Material
Item
Specification
Motorcraft Premium Gold
Engine Coolant
VC-7-A (in Oregon VC-7-B)
(yellow color)
WSS-M97B51-
A1
Draining
WARNING: Never remove the pressure relief cap while the engine is
operating or when the
cooling syst ...
Crankshaft Position (CKP) Sensor - 3.8L
Removal
1. Disconnect the battery ground cable. For additional information,
refer to Section.
2. Remove the crankshaft position (CKP) sensor.
Disconnect the connector.
Remove the bolts and the sensor.
Installation
1. To install, reverse ...
