Ford Mustang (1999-2004) Service Manual: Engine Cooling
General Specifications
Torque Specifications
- Engine Cooling (Description and Operation)
- Engine Cooling (Diagnosis and Testing)
- Cooling System Draining, Filling and Bleeding
- Engine and Radiator Flushing
- Heater Core Backflushing
- Thermostat - 3.8L
- Thermostat - 4.6L(2V)
- Thermostat - 4.6L(4V)
- Bypass Tube - 3.8L
- Bypass Tube - Cobra
- Bypass Tube - Mach I
- Water Pump - 3.8L
- Water Pump - 4.6L(2V) and 4.6L(4V)
- Radiator
- Cooling Fan Motor and Shroud
- Water Bypass Hose - 3.8L
- Degas Bottle - 4.6L(2V) and 4.6L(4V)
Engine (Installation)
Special Tool(s) Lifting Bracket, Engine 303-D087 (D93P-6001-A1) Lifting Bracket, Engine 303-D088 (D93P-6001-A2) Installer Set, Teflon Seal 211-D027 (D90P-35 ...Engine Cooling (Description and Operation)
CAUTION: Vehicle cooling systems are filled with Motorcraft Premium Gold Engine Coolant VC-7-A (in Oregon VC-7-B) or equivalent meeting Ford specification WSS-M97B51-A1 (yellow color). Always fill t ...Other materials:
Pressure Relief
Special Tool(s)
Fuel Pressure Gauge
310-012 (T80L-9974-B)
WARNING: Do not smoke or carry lighted tobacco or open flame of any
type when
working on or near any fuel-related components. Highly flammable mixtures are
always present
and may be ig ...
Air Conditioning (A/C) System Flushing
Special Tool(s)
A/C Flush and Purge Machine
219-00022 (part of 219-00023)
or equivalent
A/C Flush and Purge Fitting Kit
219-00024 (part of 219-00023)
or equivalent
WARNING: Use extreme care and observe all safety and service
...
Installation
1. CAUTION: Make sure the hardened washer is installed between the
lower
suspension arm and bushing and the shock absorber. Failure to do so can result
in
damage and failure of the lower suspension arm and bushing.
NOTE: The toe link bolt and nuts are of a ...