Ford Mustang Service Manual: Engine Emission Control

Torque Specifications

Engine Emission Control (Description and Operation)


Spark Plugs
Engine Ignition (Description and Operation) Eight separate ignition coils: are controlled by the powertrain control module (PCM). are mounted directly above each spark plug. are controlled by ...

Engine Emission Control (Description and Operation)
Engine Emission Control (Description and Operation) CAUTION: Do not remove any part of the engine emission control system. Operating the engine without the engine emission control system will reduce ...

Other materials:

Washer fluid check
WARNING: If you operate your vehicle in temperatures below 40°F (5°C), use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze protection in cold weather could result in impaired windshield vision and increase the risk of ...

Idle Air Control (IAC) Valve - 3.8L
Electronic Engine Controls (Description and Operation) The electronic engine controls consist of the following: powertrain control module (PCM) throttle position (TP) sensor idle air control (IAC) valve engine coolant temperature (ECT) sensor ...

Cooling System Draining, Filling and Bleeding
Engine Cooling (Description and Operation) CAUTION: Vehicle cooling systems are filled with Motorcraft Premium Gold Engine Coolant VC-7-A (in Oregon VC-7-B) or equivalent meeting Ford specification WSS-M97B51-A1 (yellow color). Always fill the cooling system ...