Ford Mustang (1999-2004) Service Manual: Exhaust System (Diagnosis and Testing)

Ford Mustang (1999-2004) Service Manual / Exhaust System / Exhaust System (Diagnosis and Testing)

Symptom Chart

Condition Possible Sources Action
  • Noisy or leaking exhaust
  • Broken or loose clamps, hangers or isolators.
  • Punctures in the muffler (5230).
  • Broken, loose or missing exhaust manifold fasteners or gaskets.
  • Loose heated oxygen or catalyst monitor sensor.
  • REPAIR as necessary.
  • Exhaust system misalignment.

 

  • Broken or loose catalyst internal components.
  • REPAIR as necessary.

 

 

 

 

 

 

  • ALIGN exhaust system.

 

  • LOOSEN all fasteners joining the exhaust system and SHAKE the system to isolate the concern. REPAIR as necessary
  • Loss of power
  • Kinked or damaged exhaust pipe.
  • Clogged three-way catalytic converter (5F250).
  • Foreign object in the exhaust system.
  • REPAIR as necessary.
    Exhaust System (Description and Operation)
    WARNING: The normal operating temperature of the exhaust system is very high. Never attempt to repair any part of the system until it has cooled. Be especially careful when working around the three ...

    Muffler - 3.8L
    Removal and Installation 1. Raise and support the vehicle. For additional information, refer to Section. 2. Support the rear axle with a suitable jack. 3. Remove the upper arm-to-differential bolt. ...

    Other materials:

    Key Programming - Erase All Key Codes and Program Two Keys
    Special Tool(s) Worldwide Diagnostic System (WDS) 418-F224, New Generation STAR (NGS) Tester 418-F052 or equivalent diagnostic tool NOTE: This procedure is used when a customer needs keys programmed into the system and does not have ...

    Handle - Interior Door
    Removal 1. Remove the door trim panel (23942). For additional information, refer to Section. 2. Remove the rivet. 3. Remove the cable clip. 4. Release the cable housing from the interior handle. 5. Release the actuating cable from the interior ha ...

    Disc and Pressure Plate - 4.6L (4V) Engine
    Special Tool(s) Clutch Aligner 308-020 (T74P-7137-K) Material Item Specification Premium Long Life Grease XG-1-C ESA-M1C75-B 1. Disconnect the battery ground cable. For additional information, refer to Section. 2. Remove t ...