Ford Mustang (1999-2004) Service Manual: Fittings - R-Clip
Material
Item | Specification |
SAE 5W-20 Super Premium Synthetic Blend Motor Oil XO-5W20-QSP or equivalent | WSS-M2C153- H |
Disconnect
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly flammable mixtures are always present and may be ignited, resulting in possible personal injury.
WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before servicing or disconnecting any of the fuel lines or fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing possible personal injury or a fire hazard.
CAUTION: Do not use any tools. The use of tools may cause a deformity in the clip components which may cause fuel leaks.
1. Relieve the fuel system pressure. For additional information, refer to Pressure Relief in this section.
2. Remove the shipping tab by bending.
3. Spread the R-clip legs and push the clip into the fitting.
4. Separate the fitting from the tube.
Connect
1. NOTE: Apply a light coat of clean engine oil.
Clean and inspect the fitting and the tube for damage.
2. Insert the R-clip into the fitting.
3. Insert the tube in the fitting and push together until a click is heard.
4. Pull on the connection to make sure it is fully engaged.
Fuel Line Fittings - Push Connect
Special Tool(s) Disconnect Tool, Spring Lock Coupling 310-S039 (T90T-9550-S) Material Item Specification SAE 5W-20 Super Premium Blend Motor Oil XO-5W20-QSP or equiv ...Fittings - Vapor Tube
Disconnect 1. WARNING: The evaporative emission system contains fuel vapor and condensed fuel vapor. Although not present in large quantities, it still presents the danger of explosion or fire. Disc ...Other materials:
Removal
1. Remove the upper intake manifold. For additional information, refer to
Upper Intake Manifold in
this section.
2. Partially drain the cooling system. For additional information, refer to
Section.
3. Relieve the fuel system pressure. For additional i ...
Pressure
1. Clean all dirt from and remove the brake master cylinder filler
cap and fill the brake master
cylinder reservoir with the specified brake fluid.
2. NOTE: Master cylinder pressure bleeder adapter tools are available
from various manufacturers
of pres ...
Rear Suspension (Description and Operation)
Item
Part Number
Description
1
18125
Rear shock absorber
2
-
Rear axle driveline vibration damper
3
5A649
Rear lower suspension arm and bushing (common
LH and RH)
4
5560
Rear spring
5
4731
...