Ford Mustang (1999-2004) Service Manual: Flexplate
Removal and Installation
1. Remove the transmission.
2. Remove the six bolts retaining the flexplate to crankshaft, and remove the flexplate.
3. To install, reverse the removal procedure.
Oil Pump Screen and Pickup Tube
Removal and Installation 1. Remove the oil pan (6675). For additional information, refer to Oil Pan in this section. 2. Remove the oil pump screen cover and tube (6622) and discard the gasket. ...Crankshaft Rear Seal
Special Tool(s) Impact Slide Hammer 100-001 (T50T-100-A) Remover, Crankshaft Rear Seal 303-519 (T95P-6701-EH) Replacer, Rear Crankshaft Seal 303-516 (T95P- ...Other materials:
Universal Joints
The universal joints are:
lubed-for-life design and require no lubrication.
equipped with nylon thrust washers, located at each base of the bearing
cup, which control end
play, position the needle bearing and improve grease movement.
Item ...
Supercharger Cooling System Draining, Filling and
Bleeding
Draining
WARNING: Never remove the pressure relief cap while the engine is
operating or when the
cooling system is hot. Failure to follow these instructions can result in damage
to the cooling
system or engine or personal injury. To avoid having scalding hot ...
Spindle
Special Tool(s)
Tie-Rod End Remover
211-001 (TOOL-3290-D) or
Equivalent
Removal
CAUTION: Suspension fasteners are critical parts because they affect
performance of vital
components and systems and their failure can result in major service expen ...