Ford Mustang (2005-2014) Owners Manual: Floor mats

WARNING: Always use floor mats that are designed to fit the footwell of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured to retention posts so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.

• Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal injury.
• Always make sure that the floor mats are properly attached to the retention posts in the carpet that are supplied with your vehicle.

Floor mats must be properly secured to both retention posts to ensure mats do not shift out of position.
• Never place floor mats or any other covering in the vehicle footwell that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the vehicle.
• Never place floor mats or any other covering on top of already installed floor mats. Floor mats should always rest on top of the vehicle carpeting surface and not another floor mat or other covering. Additional floor mats or any other covering will reduce the pedal clearance and potentially interfere with pedal operation.
• Check attachment of floor mats on a regular basis. Always properly reinstall and secure floor mats that have been removed for cleaning or replacement.
• Always make sure that objects cannot fall into the driver footwell while the vehicle is moving. Objects that are loose can become trapped under the pedals causing a loss of vehicle control.
• Failure to properly follow floor mat installation or attachment instructions can potentially cause interference with pedal operation causing loss of control of vehicle.
• To install floor mats, position the floor mat so that the eyelet is over the retention post and press down to lock in.
• To remove the floor mat, reverse the installation procedure.

    Driving through water
    WARNING: Drive through water in an emergency only, and not as part of normal driving. WARNING: Engine damage can occur if water enters the air filter. Note: Driving through deep water may allow water ...

    Other materials:

    Arm - Lower
    Removal CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major service expense. A new part with the same part number or an equivalent part must be installed, if i ...

    Disassembly
    Initial disassembly 1. Remove the differential housing cover (4033) and drain the lubricant into a suitable container. 2. Wipe the lubricant from the internal working parts and inspect the parts for wear and damage. 3. Using the special tool, measure and n ...

    Air Cleaner - 4.6L (2V) and 4.6L (4V)
    Removal and Installation Mach I 1. Disconnect the air intake scoop outlet tube. All vehicles 2. Remove the air cleaner outlet tube from the throttle body. For additional information, refer to Air Cleaner Outlet Pipe-4.6L (2V) or Air Cleaner Outlet Pipe- ...