Ford Mustang (1999-2004) Service Manual: Front Disc Brake (Description and Operation)
Front Disc Brake Components
Disc Brake Caliper Components
The front disc brake caliper (2B120):
- bolts to the front disc brake caliper anchor plate (2B292), which bolts to the front wheel spindle (3105).
- is a pin slider, dual piston design.
The front brake discs (1125):
- are of a ventilated full-cast design, with non-directional cooling fins.
- are serviced with the disc brake caliper and front disc brake caliper anchor plate removed.
The front brake disc shield (2K005):
- is riveted to the front wheel spindle.
- protects the front wheel bearings and inboard surface of the front brake disc.
The pads:
- are housed in the front disc brake caliper anchor plate.
- are of a non-asbestos, non-metallic composition.
Front Disc Brake
General Specifications Torque Specifications ...Pads
...Other materials:
Fuel Vapor Control Tube Assembly Valve
Removal and Installation
1. Remove the fuel tank. For additional information, refer to
Section.
2. Remove the retainers.
3. NOTE: The fuel vapor vent valve, fuel vapor control valve and the
in-line fuel tank pressure
sensor are repaired as a fuel va ...
Parking brake
WARNING: If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer as soon as possible.
WARNING: Always set the parking brake fully and make sure
that the transmis ...
Installation
1. Inspect the rear axle pinion flange seal journal for rust, nicks, and
scratches prior to installing
the flange. Polish the seal journal with fine crocus cloth, if necessary.
2. Lubricate the rear axle pinion flange splines.
Use SAE 75W-140 High Performa ...