Ford Mustang (1999-2004) Service Manual: Fuel Charging And Controls

The fuel injection supply manifold (9F792):

  • delivers fuel to the fuel injector.
  • receives fuel from the fuel supply line.

The throttle body (9E926):

  • controls air supply to the upper intake manifold (9424) by positioning the throttle plate.
  • connects the accelerator cable (9A758) and the speed control actuator cable (9A825) (if equipped) to the throttle lever.
  • is not adjustable.
  • cannot be cleaned.

The fuel injector (9F593):

  • is electrically operated by the powertrain control module (PCM) (12A650).
  • has an internal solenoid that opens a needle valve to inject fuel into the lower intake manifold.
  • atomizes the fuel as the fuel is delivered.
  • is deposit-resistant. Do not clean.

The fuel pressure relief valve (9H321):

  • is used to inspect and relieve fuel pressure.

Fuel Charging Wiring Connections

Fuel Charging Wiring Connections

 

Fuel Charging Wiring Connections

Fuel Charging Wiring Connections

Fuel Charging And Controls

Refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual.

Idle Speed Adjustment

Powertrain Control/Emissions Diagnosis (PC/ED) manual

    Fuel Charging and Controls - 4.6L (2V)
    General Specifications Torque Specifications ...

    Throttle Body
    Removal WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and may be ignited. ...

    Other materials:

    External Controls (Diagnosis and Testing)
    Refer to Wiring Diagrams Cell 37 , Shift Lock for schematic and connector information. Refer to Wiring Diagrams Cell 29 , Transmission Control for schematic and connector information. Special Tool(s) 73 Digital Multimeter 105-R0051 or equivalent ...

    Starting a gasoline engine
    When you start the engine, the idle speed increases, this helps to warm up the engine. If the engine idle speed does not slow down automatically, have your vehicle checked by an authorized dealer. Before starting the engine: • Make sure all occupants have f ...

    Fuel Injectors
    Removal WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and can ignite. Failure to follow these instructions can result in personal in ...