Ford Mustang (1999-2004) Service Manual: Fuel Injectors

Removal

WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in personal injury.

WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before working on or disconnecting any of the fuel lines or fuel system components, the fuel pressure must be relieved. Failure to follow these instructions may result in personal injury.

1. Relieve the fuel pressure. For additional information, refer to Section.

2. Remove the supply manifold. For additional information, refer to Fuel Injection Supply Manifold in this section.

3. Remove the fuel injectors from the supply manifold.

Fuel Injectors

Installation

1. NOTE: Lubricate the new O-rings with Super Premium SAE 10W-30, XO-10W30-DSP or equivalent meeting Ford specification WSS-M2C153-G, to aid installation.

Inspect the two O-rings on each fuel injector. Install new O-rings if necessary.

Fuel Injectors

2. Install the fuel injectors onto the supply manifold.

Fuel Injectors

3. Install the fuel supply manifold.

    Throttle Body
    Removal WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and may be ignited. ...

    Other materials:

    Actuator - Speed Control Servo
    1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result. Disconnect the battery ground cable. 2. Remove the LH wheel and tire; refer to Section. 3. Position aside the LH front splash shie ...

    Link - Stabilizer Bar
    Removal CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major service expense. A new part with the same part number must be installed if installation becomes nec ...

    Rear seats
    Rear Seat Entry and Exit Use the seatback release to fold the back of the front seat forward for rear seat access. This release handle is located on the upper back of the front seat. The seatback locks automatically when returned to the normal position. Use ...