Ford Mustang Service Manual: Fuel Pump Module
Fuel Tank And Lines (Description and Operation)
WARNING: Do not smoke, carry lighted tobacco or an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited, possibly resulting in personal injury.
The vehicle utilizes a returnless fuel system consisting of:
- the fuel tank.
- a fuel tank filler pipe which contains a restrictor plate to permit only unleaded fuel to be pumped into the fuel tank.
- a 1/8 turn fuel tank filler cap.
- a fuel filter providing filtration to protect the fuel injectors.
- a single fuel line accommodating the returnless fuel system.
- a fuel injection supply manifold which contains a differential pressure sensor and a fuel temperature sensor.
- a fuel pump and sender assembly which provides pressurized fuel to the engine and contains:
- an inlet filter.
- a check valve which maintains system pressure after the pump is shut off.
- a pressure relief valve for overpressure protection in the event of restricted flow.
The fuel pump is controlled by an electronic fuel pump driver module which is enabled by the powertrain control module (PCM). Electrical power to the fuel pump is provided through the inertia fuel shutoff (IFS) switch, which is located in the luggage compartment.
Fuel Tank And Lines
Refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual.
Support Straps
Fuel Tank And Lines (Description and Operation) WARNING: Do not smoke, carry lighted tobacco or an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures ...Fuel Tank Filler Pipe
Fuel Tank And Lines (Description and Operation) WARNING: Do not smoke, carry lighted tobacco or an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures ...Other materials:
Exhaust System (Diagnosis and Testing)
Symptom Chart
Condition
Possible Sources
Action
Noisy or
leaking
exhaust
Broken or loose
clamps, hangers or
isolators.
Punctures in the muffler
(5230).
Broken, loose or
missing exhaust
manifold fa ...
Motor - Window Regulator
Glass, Frames and Mechanisms (Description and Operation)
Component Location
Windshield Glass
The windshield exterior mouldings are installed with the windshield
glass. The windshield exterior
mouldings cannot be replaced without removal of the w ...
Creating a MyKey
Use the information display to create a MyKey.
For Type 1 information displays:
1. Insert the key you want to program into the ignition.
2. Switch the ignition on.
3. Access the main menu within the information display, and press SETUP using the
informat ...