Ford Mustang (1999-2004) Service Manual: Gearshift Rail Bushing
Special Tool(s)
Universal Puller Set 303-DS005 (D80L-100-A) or equivalent | |
Installer, Shift Rail Bushing 308-244 (T96P-7025-F) | |
Slide Hammer 100-001 (T50T-100-A) |
Disassembly and Assembly
1. Using the special tools, remove the gearshift rail bearing from the transmission case. Discard the bearing.
2. Using the special tool, install the main shift rail bearing.
Synchronizers
Disassembly and Assembly NOTE: This procedure applies to all synchronizer assemblies. 1. Scribe an alignment mark on the sliding sleeve and the hub for assembly reference. 2. Remove the sliding sleev ...Gearshift Rail and Fork
Disassembly and Assembly 1. Using a 5/32-inch drift and a hammer, remove and discard the split pin. Slide the shift fork from the shift rail. 2. Remove the gearshift fork inserts. 3. CAUTION: Sup ...Other materials:
Manual climate control
A. Defrost: Distributes air through the windshield defroster vents
and demister vents. You can use this setting to defog and clear the
windshield of a thin covering of ice.
B. Rear defrost: Turns the heated windows and mirrors off and on.
See Heated windows ...
Transmission (Disassembly)
Special Tool(s)
Holding Fixture, Transmission
307-003 (T57L-500-B)
Puller, Bearing
205-D064 (D84L-1123-A)
2 or 3 Jaw Puller
205-D027 (D80L-1013-A)
Remover, Mainshaft Bearing
308-058 (T77J-7025-H)
...
Supercharger Belt Tensioner
Removal and Installation
1. Remove the supercharger drive belt cover.
2. Rotate the supercharger belt tensioner clockwise and remove the
supercharger belt.
3. Remove the bolts and the supercharger belt tensioner.
4. To install, reverse the removal proced ...