Ford Mustang (2005-2014) Owners Manual: General information

Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford authorized dealers who are there to help you with their professional servicing expertise.

We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly. They are supported by a wide range of highly specialized tools developed specifically for servicing your vehicle.

To help you service your vehicle, we provide Scheduled Maintenance Information which makes tracking routine service easy.

If your vehicle requires professional service, your authorized dealer can provide the necessary parts and service. Check your warranty information to find out which parts and services are covered.

Use only recommended fuels, lubricants, fluids and service parts conforming to specifications. Motorcraft® parts are designed and built to provide the best performance in your vehicle.

Precautions

• Do not work on a hot engine.
• Make sure that nothing gets caught in moving parts.
• Do not work on a vehicle with the engine running in an enclosed space, unless you are sure you have enough ventilation.
• Keep all open flames and other burning material (such as cigarettes) away from the battery and all fuel related parts.

Working with the Engine Off

1. Set the parking brake and shift to P (Park).
2. Turn off the engine and remove the key (if equipped).
3. Block the wheels.

Working with the Engine On

WARNING: To reduce the risk of vehicle damage or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running.

1. Set the parking brake and shift to position P.
2. Block the wheels.

    Opening and closing the hood
    1. Inside the vehicle, pull the hood release handle located on the driver’s side kick panel. 2. Go to the front of the vehicle and release the auxiliary latch that is located under the front cente ...

    Other materials:

    Pinpoint Test F: LFC 16/DTC B1888 - Passenger Air Bag Circuit Shorted to Ground
    Normal Operation The restraints control module (RCM) checks for passenger air bag circuit shorts to ground by monitoring the voltage of circuits 607 (LB/OG) and 616 (PK/BK) at pins 6 and 7. If the RCM detects a short to ground on either of these pins, i ...

    Retractor - Rear Seat Safety Belt, Coupe
    Special Tool(s) Torx Bit, Safety Belt Bolt 501-010 (T77L-2100-A) Removal 1. Remove the quarter trim panel (31012) and the angel wing trim. For additional information, refer to Section. 2. Using the special tool, remove the D-ring bolt. 3. U ...

    Inspection and Verification
    WARNING: A vehicle equipped with a Traction-Lok differential will always have both wheels driving. If, while the vehicle is being serviced, only one wheel is raised off the ground and the rear axle is driven by the engine, the wheel on the ground could drive ...