Ford Mustang (1999-2004) Service Manual: Generator - 4.6L 4V
Removal and Installation
1. Disconnect the battery. For additional information, refer to Section.
2. Relieve the accessory drive belt tension and remove the belt from the generator pulley.
3. Raise and support the vehicle. For additional information, refer to Section.
4. Disconnect the generator electrical connections.
- Disconnect the electrical connector.
- Position the cover aside, and remove the nut and battery positive cable.
5. Remove the upper and lower generator bolts.
6. Remove the generator by lifting up and pulling it forward.
7. To install, reverse the removal procedure.
Generator - 4.6L 2V
Removal and Installation 1. Disconnect the battery (10655). For additional information, refer to Section. 2. Relieve the accessory drive belt (8620) tension and remove the belt from the gen ...Audio Systems
...Other materials:
Front Seat Backrest
Disassembly and Assembly
All vehicles
1. Remove the front seat backrest. For additional information, refer to
Front Seat Backrest in this
section.
2. Remove the front seat backrest head restraint (611A08).
3. Remove the screws and the safety belt guid ...
Autolamps
WARNING: In severe weather conditions, it may be necessary to
switch your headlamps on manually.
Note: If the vehicle is equipped with autolamps, it will have the
windshield wiper rainlamp feature. When the windshield wipers are
turned to low- or high-speed wi ...
Component Tests
Driveline Vibration
An analysis of driveline vibration can also be conducted using the Vibration
Analyzer; follow the
manufacturer's directions.
Driveline vibration exhibits a higher frequency and lower amplitude than does
high-speed shake.
Driveline vibra ...