Ford Mustang (1999-2004) Service Manual: Idle Air Control (IAC) Valve - Mach I
Removal and Installation
1. Remove the air intake scoop. For additional information, refer to Section.
2. Disconnect the idle air control (IAC) valve electrical connector.
3. Remove the bolts, the IAC valve and the gasket.
4. NOTE: Install a new gasket if necessary.
To install, reverse the removal procedure.
Idle Air Control (IAC) Valve - Cobra
Removal and Installation 1. Disconnect the idle air control (IAC) valve electrical connector. 2. Remove the bolts, the IAC valve and the gasket. 3. NOTE: Install a new gasket if necessary. To i ...Cylinder Head Temperature (CHT) Sensor - 3.8L
Removal 1. Disconnect the battery ground cable. For additional information refer to Section. 2. Disconnect the cylinder head temperature sensor connector. 3. Remove the CHT sensor. Install ...Other materials:
Spring Lock Coupling
The spring lock coupling is a refrigerant line coupling held together by a
garter spring inside a circular
cage.
When the coupling is connected together, the flared end of the female
fitting slips behind the
garter spring inside the cage of th ...
Assembly
1. Lubricate the differential side gear thrust washers and the differential
side gear journals, and
assemble the washers to the gears.
Use SAE 75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B or
equivalent
meeting Ford specification WSL-M2C192-A ...
Motorcraft part numbers
1For spark plug replacement, see your authorized dealer. See Scheduled
Maintenance
Information for the appropriate intervals for changing the spark plugs.
Replace the spark plugs with ones that meet Ford material and design
specifications for
your vehicle, ...