Ford Mustang Service Manual: Inspection and Verification
Principles of Operation
Key-In-Ignition Warning Chime
The key-in-ignition warning chime activates when the generic electronic module (GEM) detects the ignition switch circuits are in the OFF or ACC states and when the GEM detects the driver door is ajar from the driver door ajar circuits. Refer to the Chime Duration Table in this section for audible output, duration time, and priority ratings.
Airbag Warning Chime
The airbag warning chime activates when the GEM detects the ignition switch circuits are in the RUN state and when the GEM detects a chime is requested from the airbag system circuit. Refer to the Chime Duration Table for audible output, duration time, and priority ratings.
Door Ajar Warning Chime
The door ajar warning chime activates when the GEM detects the ignition switch circuits are in the RUN state and when the GEM detects the driver or passenger door is ajar from the driver and passenger door ajar circuits. Refer to the Chime Duration Table in this section for audible output, duration time, and priority ratings.
Headlamps Left on Warning Chime
The headlamps left on warning chime activates when the GEM detects the ignition switch circuits are in the KEYOUT state, when the GEM detects the driver door is ajar from the driver door ajar circuit, and when the GEM detects the headlamps or parklamps are on from the exterior lamp circuits. Refer to the Chime Duration Table in this section for audible output, duration time, and priority ratings.
Safety Belt Warning Chime
The safety belt warning chime and safety belt warning lamp activate when the GEM detects the ignition switch circuits are in the RUN or START state and when the GEM detects the safety belt is unbuckled from the safety belt circuit. The safety belt warning lamp indicator will prove out for three seconds whenever the GEM detects that the ignition circuits make a transition to RUN from OFF, ACC, or KEYOUT state. Refer to the Chime Duration Table in this section for audible output, duration time, and priority ratings.
Belt Minder
NOTE: Belt minder is a configurable item. If configuring using a diagnostic tool, refer to Section. To configure without using a diagnostic tool, refer to Belt Minder Deactivating/Activating in this section.
The belt minder feature supplements the current safety belt warning function. The belt minder feature is enabled after the current safety belt warning is complete. If the driver safety belt is not buckled approximately five seconds after the safety belt warning light has turned off, the belt minder reminds the driver that their safety belt is unbuckled by intermittently sound a chime and illuminating the safety belt warning lamp in the instrument cluster. While activated, the belt minder alternates the chime and indicator from on for six seconds to off for 30 seconds.
The belt minder reminder stops when:
- the drive seat belt is buckled.
- the ignition is turned to OFF or ACC.
- five minutes have elapsed since belt minder has started.
Chime Duration Table
Feature | Audible Output | Duration | Priority |
Safety belt | Chime, 60/minute 740 Hz | 6.0 seconds | 1 |
Key-in-ignition | Chime, 120/minute 740 Hz | Continuous | 2 |
Headlamps left on | Chime, 240/minute 740 Hz | Continuous | 3 |
Airbag | Single tone, 1,000 Hz | Continuous | 4 |
Door ajar | Single tone, 1,000 Hz | 1.0 second | 7 |
Principles of Operation
Principles of Operation Key-In-Ignition Warning Chime The key-in-ignition warning chime activates when the generic electronic module (GEM) detects the ignition switch circuits are in the OFF or ...Pinpoint Tests
Principles of Operation Key-In-Ignition Warning Chime The key-in-ignition warning chime activates when the generic electronic module (GEM) detects the ignition switch circuits are in the OFF or ...Other materials:
Air Distribution
Air Distribution
NOTE: The air distribution system of this vehicle cannot be equipped
with a cabin air filter.
There are two sources of air available to the air distribution system:
outside air
recirculated air
Recirculated air is only used during MAX A/ ...
Transmission (Disassembly)
Manual Transmission
The T56 six-speed manual transmission features the following:
six forward speeds and one reverse speed.
forward gears are synchronized and helical cut.
a reverse gear operates through a constant-mesh, fully synchronized
system.
a shi ...
Air Conditioning Line (Peanut) Fitting
Climate Control System (Description and Operation)
WARNING: To avoid accidental deployment and possible injury, the air
bag system
backup power supply must be depleted before repairing any climate control
components. To
deplete the backup power supply, disco ...