Ford Mustang (1999-2004) Service Manual: Installation

1. Lubricate the lip of the wheel bearing oil seal

  • Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESAM1C75- B.

2. CAUTION: Do not damage the wheel bearing oil seal.

Install the two axle shafts.

Axle Shaft

3. CAUTION: Do not damage the rubber O-ring in the axle shaft groove.

Install the U-washer.

1. Position the two U-washers on the button end of the axle shaft.

2. Pull the axle shaft outward.

Axle Shaft

4. NOTE: If a new pinion shaft lock bolt is unavailable, coat the threads with Threadlock and Sealer EOAZ-19554-AA or equivalent meeting Ford specification WSK-M2G351-A5 prior to installation.

Install the differential pinion shaft.

1. Align the hole in the differential pinion shaft with the case lock bolt hole.

2. Install a new differential pinion shaft lock bolt.

Axle Shaft

5. Install the differential housing cover and fill the rear axle with the specified lubrication. For additional information, refer to Differential Housing Cover in this section.

6. Install the rear brake anti-lock sensor. .

7. Install the rear brakes. .

8. Install the tire and wheel assembly. 9. Lower the vehicle.

    Removal
    1. Raise and support the vehicle. 2. Remove the wheel and tire assembly. 3. Remove the rear brake disc (2C026). 4. Remove the differential housing cover (4033) and drain the lubricant. For addi ...

    Other materials:

    Disassembly
    1. Remove the driveshaft (4602). For additional information, refer to Driveshaft in this section. 2. CAUTION: Under no circumstances is the driveshaft assembly to be clamped in the jaws of a vise or similar holding fixture. Denting or localizing fracture ca ...

    Rear Ride Height Measurement - GT and Base
    Item Description 1 Body reinforcement 2 Ride height (shortest distance) 3 Rear axle Wheel Track Item Part Number Description 1 - Front track 2 - Rear track Dogtracking Item Part N ...

    Engine (Installation)
    Special Tool(s) Heavy Duty Floor Crane 014-00071 or equivalent Spreader Bar 303-D089 (D93P-6001-A3) or equivalent Material Item Specification SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP or equivalent ...