Ford Mustang Service Manual: Installation
Removal
1. Remove the roller followers. For additional information, refer to Camshaft Roller Follower in this section.
2. Remove the LH timing chain (6268) for the LH side and both timing chains for the RH side. For additional information, refer to Timing Drive Components in this section.
3. Install the special tool.
4. Remove the exhaust camshaft sprocket (6250) and the intake camshaft bolt, washer and spacer.
5. Remove the special tool.
6. Compress the tensioner (6L266) and install a lock pin.
7. Remove the timing chain, the sprocket, and intake camshaft sprocket spacer.
8. NOTE: LH shown; RH similar.
Remove the bolts.
9. CAUTION: The outer bolts on the outer cam bearing cap (exhaust) are longer and must be returned to the same location or engine damage may occur.
NOTE:
Identify the camshaft to cylinder head location. Caps are not interchangeable.
Remove the bolts and the camshaft bearing cap assemblies.
10. Remove the camshafts (6250).
Removal
Removal 1. Remove the roller followers. For additional information, refer to Camshaft Roller Follower in this section. 2. Remove the LH timing chain (6268) for the LH side and both timing chains for ...Exhaust Manifold RH
Engine (Description and Operation) WARNING: Do not operate the engine with the hood open until the fan blade has been first examined for possible cracks and separation. The 4.6L (4V) (281 CID) Cobra ...Other materials:
Refueling
WARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries.
To help avoid injuries to you and others:
• Read and follow all the instructions on the pump island.
• Turn off your engine when you are refueling.
• Do not smoke if you are ne ...
Intake Manifold
Engine
A modular engine is built around four modules:
the intake module
the cylinder head module (RH)
the cylinder head module (LH)
the lower engine module
While not all repairs can take advantage of the modular conc ...
Supercharger Cooling
General Specifications
a - Use the same type coolant that was drained from the cooling system.
Do not mix coolant types.
b - The addition of Motorcraft Cooling System Stop Leak Pellets, VC-6,
darkens Motorcraft Premium
Gold Engine Coolant from yell ...