Ford Mustang (1999-2004) Service Manual: Installation
1. Install the upper intake manifold gasket.
2. Install the intake manifold and bolts in the sequence shown.
3. Install the PCV valve-to-intake manifold tube.
4. Connect the vacuum hoses and the electrical connector to the EGR vacuum regulator solenoid.
5. Connect the EGR tube to the EGR valve.
6. Connect the hoses to the differential pressure feedback EGR.
7. Connect the main chassis vacuum supply line and the EGR valve vacuum line.
8. Connect the IAC valve and the differential pressure feedback EGR electrical connectors.
9. Connect the EVAP return hose.
10. Connect the TP sensor.
11. Position the cables and bracket.
- Install the bolts, connect the clip.
12. Connect the throttle cable, the speed control actuator cable and throttle return spring.
13. Install the air cleaner outlet tube. For additional information, refer to Section.
14. Install the air intake scoop bracket. For additional information, refer to Section .
Removal
1. Remove the air intake scoop bracket. For additonal information, refer to
Section.
2. Remove the air cleaner outlet tube. For additional information, refer to
Section.
3. Disconnect the accelera ...
Intake Manifold - Lower
Material
Item
Specification
Metal Surface Cleaner
F4AZ-19A536-RA or equivalent
WSE-M5B392-A
...
Other materials:
Water Bypass Hose - 3.8L
Removal and Installation
1. Drain the engine coolant. For additional information, refer to Cooling
System Draining, Filling
and Bleeding in this section.
2. Remove the bypass hose.
3. To install, reverse the removal procedure.
4. Fill and bleed the co ...
Sync applications and services (if equipped)
Note: In order for the following features to work, your cellular phone
must be compatible with SYNC. To check your phone’s compatibility, visit
www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca.
• SYNC Services (if equipped, United States only): ...
Headliner
Removal
1. Remove the two upper quarter panels. For additional information,
refer to Trim Panel-Upper
Quarter in this section.
2. Remove the two windshield side garnish mouldings.
3. Remove the two sun visors.
1. Remove the six screws.
2. ...
