Ford Mustang Service Manual: Installation

Removal

1. Remove the upper intake manifold. For additional information, refer to Intake Manifold-Upper in this section.

2. Disconnect the fuel line. For additional information, refer to Section.

3. Remove the coolant by-pass tube. For additional information, refer to Section.

4. Remove the generator. For additional information, refer to Section.

5. Disconnect the electrical connector and the vacuum line from the fuel pressure sensor.

6. Disconnect the eight fuel injector electrical connectors.


6. Disconnect the eight fuel injector electrical connectors.

7. Separate the fuel charging wiring harness from the fuel injection supply


7. Separate the fuel charging wiring harness from the fuel injection supply manifold studs in three places.

8. Remove the ten bolts in the sequence shown and raise the lower intake


8. Remove the ten bolts in the sequence shown and raise the lower intake manifold slightly.

9. Disconnect the fuel charging wiring harness from the rear of the lower


9. Disconnect the fuel charging wiring harness from the rear of the lower intake manifold and remove the manifold.

10. Remove the intake manifold gaskets.

  • Clean and inspect the sealing surfaces.

Installation


    Removal
    Removal 1. Remove the upper intake manifold. For additional information, refer to Intake Manifold-Upper in this section. 2. Disconnect the fuel line. For additional information, refer to Section. 3 ...

    Valve Cover RH
    Engine WARNING: Do not operate the engine with the hood open until the fan blade has been first examined for possible cracks and separation. The 4.6L (4V) (281 CID) is a V-8 engine with the follow ...

    Other materials:

    Throttle Body
    Fuel Charging and Controls The fuel injection supply manifold: receives fuel from the fuel supply line. delivers fuel to the fuel injector. The throttle body: controls air supply to the intake manifold by positioning the throttle plate. connects the a ...

    Fuel Charging And Controls
    Fuel Charging And Controls The fuel injection supply manifold (9F792): delivers fuel to the fuel injector. receives fuel from the fuel supply line. The throttle body (9E926): controls air supply to the upper intake manifold (9424) by positioning the th ...

    Checks and Services
    General Maintenance Information NOTE: This is a generic maintenance schedule for all Ford, Lincoln and Mercury vehicles. There may be items listed that do not apply to all vehicles. The Normal Schedule applies to operation of the vehicle under typical, every ...