Ford Mustang (1999-2004) Service Manual: Instrument Panel and Console
Torque Specifications
Instrument Panel
The instrument panel consists of the following components:
- instrument cluster
- instrument panel finish panels
- audio unit
- A/C controls
- glove compartment door
- passenger air bag module
- glove compartment
- instrument panel steering column cover
- instrument panel reinforcement
- instrument panel defroster grille
Console -Floor
The floor console consists of the following components:
- console glove compartment
- console glove compartment door
- beverage holder
- cigar lighter knob and element
- power point
- glove compartment hinge
- console finish panel
- coin holder
- convertible top control switch (if equipped)
Installation
All vehicles CAUTION: After installing the urethane installed windshield, the vehicle should not be driven until the urethane adhesive has cured. The curing time at temperatures above 13C (5 ...Other materials:
Appendices
GENERAL INFORMATION
SYNC® End User License Agreement (EULA)
• You have acquired a device (“DEVICE”) that includes software
licensed by FORD MOTOR COMPANY from an affiliate of Microsoft
Corporation (“MS”). Those installed software products of MS orig ...
Camber Adjustment - Rear
1. Loosen the nut.
2. Rotate the bolt and the cam to the correct camber setting.
3. Tighten the nut while holding the bolt and the cam stationary.
4. Recheck the wheel alignment. Follow the manufacturer's instructions.
Adjust as necessary. ...
Interior Lighting (Diagnosis and Testing)
Refer to Wiring Diagrams Cell 111 , Remote Control Alarm and Lock System
for schematic and
connector information.
Refer to Wiring Diagrams Cell 59 , Generic Electronic Module for schematic
and connector
information.
Refer to Wiring Diagrams Cell 89 , ...