Ford Mustang (1999-2004) Service Manual: Key Programming - Enable/Disable Spare Key Programming
Special Tool(s)
Worldwide Diagnostic System (WDS) 418-F224, New Generation STAR (NGS) Tester 418-F052, or equivalent diagnostic tool |
NOTE: The spare key programming switch is a diagnostic tool programmable switch that provides the capability to enable/disable the spare key programming procedure. This procedure is in the Owners Guide spare key programming procedure or in this section under Key Programming-Program a Key Using Two Programmed Keys . This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want the spare key programming procedure available to the vehicle driver.
NOTE: The spare key programming switch state can be viewed by instrument cluster PID SPARE_KY.
1. Insert a programmed ignition key into the ignition lock cylinder and turn the ignition switch to RUN.
2. Enter diagnostic tool. Follow the SECURITY ACCESS PROCEDURE. For additional information, refer to Security Access-Procedure to obtain security access.
3. NOTE: The default setting on delivery of all new vehicles is <ENABLE>.
From diagnostic tool menu, select SPARE KEY PROGRAMMING SWITCH selection to the desired setting: <ENABLE> Spare key programming procedure is accessible.
<DISABLE> Spare key programming procedure is not accessible.
Key Programming - Program a Key Using Two Programmed Keys
Special Tool(s) Worldwide Diagnostic System (WDS) 418-F224, New Generation STAR (NGS) Tester 418-F052, or equivalent diagnostic tool NOTE: This procedure only works if two or ...Key Programming - Additional Key With One Programmed Key
Special Tool(s) Worldwide Diagnostic System (WDS) 418-F224, New Generation STAR (NGS) Tester 418-F052, or equivalent diagnostic tool NOTE: This procedure is used when a custo ...Other materials:
Piston - Pin Diameter
1. Measure the piston pin diameter in two directions at the points shown.
Verify the diameter is
within specification.
Refer to the appropriate section in Group for the procedure.
If out of specification, install new components as necessary. Refer
...
Fuse specification chart
Power Distribution Box
WARNING: Always disconnect the battery before servicing high
current fuses.
WARNING: To reduce risk of electrical shock, always replace
the cover to the power distribution box before reconnecting the
battery or refilling fluid reservoirs ...
Engine Support Insulators
Special Tool(s)
3 Bar Engine Support Kit
303-F072
Engine Lift Bracket Set
303-D095 (D94L-6001-A) or
equivalent
...