Ford Mustang (1999-2004) Service Manual: Keyless Entry (Diagnosis and Testing)
Refer to Wiring Diagrams Cell 59 , Generic Electronic Module for schematic and connector information.
Refer to Wiring Diagrams Cell 111 , Remote Keyless Entry (RKE) for schematic and connector information.
Special Tool(s)
 |
73 Digital Multimeter or equivalent 105-R0051 |
 |
Worldwide Diagnostic System (WDS) 418-F224 New Generation STAR (NGS) Tester 418-F052, or equivalent scan tool |
Switch - Door Lock
Removal
1. CAUTION: Place a rag between the window regulator switch
plate and the door trim
panel to avoid damaging the door trim panel.
Position the window regulator switch plate (14524) asi ...
Principles of Operation
NOTE: Battery power and ground must be remove before disconnecting
the GEM connectors to avoid
setting false codes.
Power Locks Operation
The power locks feature allows the customer to lock a ...
Other materials:
Ignition Coil - Coil On Plug
Removal
1. Disconnect the battery ground cable (14301). For additional
information, refer to Section.
2. Remove the air cleaner outlet tube (9B659). For additional information,
refer to Section.
3. NOTE: One ignition coil is shown, and the others are ...
Accelerator Cable Bracket - 4.6L (2V)
Removal and Installation
1. Disconnect the speed control cable from the throttle body and the bracket.
For additional
information, refer to Section.
2. Disconnect the accelerator cable from the throttle body by rotating the
throttle body full open
and align ...
Removal
1. Remove the roller followers. For additional information, refer to Roller
Followers in this section.
2. Remove the spark plugs. For additional information, refer to Section .
3. Position the piston of the cylinder being serviced at the bottom of the
stro ...
