Ford Mustang (1999-2004) Service Manual: Lamp Assembly - Headlamp
Removal
1. NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.
Raise the headlamp retainers.
2. Remove the headlamp assembly.
- Disconnect the electrical connectors and replace the lamp if necessary.
Installation
1. To install, reverse the removal procedure.
- If necessary, adjust the headlamps. For additional information, refer to Headlamp Adjustment in this section.
Bulb - Headlamp
Removal WARNING: The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Grasp the bul ...Lamp Assembly - Fog Lamp (GT)
Removal 1. Raise and support the vehicle. 2. Remove the screw. 3. Partially lower the vehicle and remove the fog lamp assembly. 1. Disconnect the electrical connector. 2. Remove the two sc ...Other materials:
Hill start assist
WARNING: The hill start assist feature does not replace the
parking brake. When you leave the vehicle, always apply the
parking brake and shift the transmission into position P for automatic
transmission or position 1 for manual transmissions.
WARNING: You mus ...
Transmission Cooling - Integral
This vehicle with an automatic transmission is equipped with an integral
transmission fluid cooler. The
cooler is contained inside of the radiator outlet tank and cannot be serviced
separately. The cooler
transfers heat from the transmission fluid to the eng ...
Anti-theft system
The active anti-theft system is designed to warn you in the event of
unauthorized vehicle entry and is also designed to help prevent
unwanted towing of the vehicle.
You can choose what is monitored by arming the system in different
ways.
Partial Monitor Mode
...