Ford Mustang (1999-2004) Service Manual: Manual Transmission

The TR3650 five-speed manual transmission features the following:

  • The fifth speed gear functions as an overdrive gear.
  • The forward gears are synchronized and helical cut.
  • The reverse gear operates through a constant-mesh, fully synchronized system.
  • The shift interlock system prevents the engagement of more than one gear.
  • The countershaft is serviced as an assembly.
  • An aluminum main case, extension housing and bell housing.

Transmission Internal Components - Disassembled View

Transmission Internal Components - Disassembled View

 

Transmission Internal Components - Disassembled View

Transmission Internal Components - Disassembled View

Transmission Internal Components - Disassembled View

Transmission Case and Shift Components - Disassembled View

Transmission Case and Shift Components - Disassembled View

 

Transmission Case and Shift Components - Disassembled View

Transmission Case and Shift Components - Disassembled View

Transmission Identification

The transmission identification tag is located under the lower bolt that retains the extension housing to the main case.

The five speed overdrive (TR3650) transmission is available for the Mustang 4.6L (2V).

Transmission Identification

Transmission Identification

 

Transmission Identification

    Manual Transaxle/Transmission - TR3650
    General Specifications Torque Specifications ...

    Bearings - Inspection
    NOTE: If any of the following conditions exist, install a new bearing. 1. Inspect the bearing for a bent cage. 2. Inspect bearings for galling (metal smears on roller ends). Galling is caused ...

    Other materials:

    Cleaning products
    For best results, use the following products or products of equivalent quality: Motorcraft Bug and Tar Remover (ZC-42) Motorcraft Custom Bright Metal Cleaner (ZC-15) Motorcraft Detail Wash (ZC-3-A) Motorcraft Dusting Cloth (ZC-24) Motorcraft Engine Shampoo and ...

    Principles of Operation
    Evaporative Emission (EVAP) Canister Purge Valve The EVAP canister purge valve is controlled by the powertrain control module (PCM). The EVAP canister purge valve controls the flow of fuel vapors from the EVAP canister to the engine intake manifold duri ...

    Brake Booster - Vacuum (Removal and Installation)
    Removal 1. Disconnect the battery ground cable (14301). 2. Remove the air cleaner housing. 3. Remove the brake master cylinder nuts. 4. Position the brake master cylinder (2140) aside. 5. With the engine off, depress the brake pedal (2455) several t ...